Iron Castings

  • High Hardness Machining Casting Ni-hard Cast Iron Guide Bend

    Contact Now

    High Hardness Machining Casting Ni-hard Cast Iron Guide Bend

    Abrasion Resistant Steel Introduction Nickel hard cast iron is based on ordinary white cast iron by adding 3%~5% nickel and 1.5%~3.5% chromium, to obtain a very hard and wear-resistant martensitic matrix +M3C carbide structure. The solid solution of nickel and iron can effectively improve...Read More

  • ASTM A532 High Chromium Cast Iron Liners

    Contact Now

    ASTM A532 High Chromium Cast Iron Liners

    Cast Iron Liners Introduction The lifting effect of the lining plate on the sphere basically depends on the static friction between it and the sphere. The static friction coefficient of wet grinding machine is 0.35, and that of dry process mill is 0.4. Because the static friction coefficient is...Read More

  • Nihard White Iron Spare Parts Chute Liners for Mine Mill

    Contact Now

    Nihard White Iron Spare Parts Chute Liners for Mine Mill

    Nickel Alloy Castings Introduction The common characteristics of chute are large material impact, serious wear and high working temperature. From the point of view of tribology system, the wear failure of chute is dominated by abrasive wear and corrosive wear, and adhesive wear may occur when...Read More

  • Cast Iron Nickel Alloy Foundry Steels

    Contact Now

    Cast Iron Nickel Alloy Foundry Steels

    Casting and Forging Introduction Chromium molybdenum alloy steel liner has good hardenability, linear expansion coefficient is low, after heat treatment, the microstructure of the plate lining for acicular tempered martensite and dispersed carbides and residual austenite, chromium molybdenum...Read More

  • Continuous Cast Iron Bar

    Contact Now

    Continuous Cast Iron Bar

    Continuous Cast Iron Bar Introduction The Chute Linings capacity of our company is 30,000MT/year and the single piece is from 15kg to 20tons. The capacities of Mid-frequency induction electric furnaces are 15tons,12tons, 5tons,2tons, 1.5tons and 1.2tons. And we have 10 sets of heat-treatment...Read More

  • Ductile Iron Spheroidal Graphite

    Contact Now

    Ductile Iron Spheroidal Graphite

    Ductile Iron Spheroidal Graphite Introduction Ductile iron is a kind of high-strength cast iron material. Its comprehensive performance is close to that of steel. It is based on its excellent performance and has been successfully used to cast some parts with high stress, high strength, toughness...Read More

  • Ductile Iron Castings For Section Mill

    Contact Now

    Ductile Iron Castings For Section Mill

    Ductile Iron Castings for Section Mill Introduction Rolling composite lining board with 3Cr13 stainless steel and Q345 low alloy steel, through special process, so that the two kinds of material are bonded together by heat treatment processing to achieve different degrees of hardness values,...Read More

  • Ductile Iron Casting Parts For Rolling Mills

    Contact Now

    Ductile Iron Casting Parts For Rolling Mills

    Ductile Iron Casting Parts for Rolling Mills Introduction Ductile iron is an iron-carbon alloy with a carbon content of more than 2% of pig iron, and contains various elements such as C, SI, Mn, S, and P. In comparison, the ductile iron castings have a smaller splitting effect on the metal...Read More

  • Ductile Iron Casting Parts

    Contact Now

    Ductile Iron Casting Parts

    Ductile Iron Casting Parts Introduction Carbon exists in the form of spheroidal graphite, its mechanical properties are far better than gray iron and close to steel. It has excellent casting, cutting and wear resistance, and has certain elasticity. It is widely used in the manufacture of...Read More

  • Nodular Iron Castings

    Contact Now

    Nodular Iron Castings

    Nodular Iron Castings Introduction The ductile iron parts are obtained by spheroidizing and inoculation to obtain spheroidal graphite, which effectively improves the mechanical properties of the cast iron, especially the plasticity and toughness, thereby obtaining higher strength than the carbon...Read More

  • Gray Iron Casting Parts

    Contact Now

    Gray Iron Casting Parts

    Gray Iron Casting Parts Introduction The Chute Linings capacity of our company is 30,000MT/year and the single piece is from 15kg to 20tons. The capacities of Mid-frequency induction electric furnaces are 15tons,12tons, 5tons,2tons, 1.5tons and 1.2tons. And we have 10 sets of heat-treatment...Read More

  • Sand Grey Iron Casting Grate Bar

    Contact Now

    Sand Grey Iron Casting Grate Bar

    Sand Grey Iron Casting Grate Bar Introduction The Chute Linings capacity of our company is 30,000MT/yearand the single piece is from 15kg to 20tons. The capacities of Mid-frequency induction electric furnaces are 15tons,12tons, 5tons,2tons, 1.5tons and 1.2tons. And we have 10 sets of...Read More

First Prev 12 Next Last 1/2
We're one of the leading iron castings manufacturers and suppliers in China. Welcome to buy high quality iron castings at competitive price here . For details, welcome to contact our factory.
Products List