Home > Knowledge > Content
Introduction of casting technology for alloy castings and requirements for attention
Sep 11, 2018

Alloy cast steel parts are very important in the whole process of casting. Therefore, in the production of cast steel parts, every operation of casting link should be carried out in strict accordance with the requirements.What are the common casting processes in production?

1. Pouring of alloy cast steel: the finished product is released from the mold, while the mold is a part of the product itself.

2. Insert casting of alloy cast steel parts.A variety of non-plastic parts are placed in the mold cavity and solidified with the injected liquid material to be encapsulated in it.

3. Pressure casting of alloy castings.Applying certain pressure to the material during casting helps to inject the viscous material into the mold and shortens the filling time, which is mainly used in epoxy resin casting.

4.Rotational casting of alloy cast steel.After the material is injected into the mold, the mold rotates around a single or multiple axis at a low speed.For the manufacture of spherical, tubular and other hollow products.

5.Centrifugal casting of alloy castings.The liquid material is injected into a mold which rotates rapidly around a single shaft and can be heated. The material is distributed to the inner wall of the mold cavity by centrifugal force and solidified into tubular or hollow tubular products through physical or chemical action.Monomer cast nylon parts can also be formed by centrifugal casting.http://www.wuxiorient.com/


Products List